The beauty of WiSA Certified speakers is that you can keep adding extra speakers to your system. Currently, WiSA Certified Transmitters will support up to 8 channels of sound, but you can add more speakers to have multiple speakers per channel, up to 15 total!
When you order an extra set of Platin satellite speakers, each speaker will be pre-programmed with a position, so please take a look at the back of the speakers to see their designated position.
You should only have to perform a "Scan for Speakers" in order for your speakers to be found and associated with their designated/pre-programmed position. If you need to make any adjustments to your configuration or if the speakers are assigned to the wrong position(this is not common), please follow the instructions below:
Download and install the mobile application
For the WiSA App (Blue) (NEW)
Steps to change speaker position:
- In MyZone, press the "Change Speaker Assignment" button.
- Your speakers will be shown on the next screen with 2 button options "Cancel" and "Confirm Assignment"
- You can TAP each speaker to Chime and perform other operations.
- TAP & HOLD to DRAG your speaker to a new position. A "+" icon will be shown over the icon of the speaker you are moving once you hover over the new position.
For the WiSA SoundSend App (Magenta)
Steps to change speaker position:
- Navigate to Channel Check in the Advanced Settings Tab.
- Tap on each speaker to Chime in the speaker map.
- TAP & HOLD and DRAG the desired speaker icon to a new position.
- For positions that have multiple speakers, you will see an icon that is Doubled up.
- TAP the double icon to see a list of assigned speakers.
- SELECT a speaker from the list to chime.
- TAP OUT of the list. The last speaker "Chimmed" is NOW the SELECTED speaker to move.
- TAP & HOLD and DRAG the desired speaker icon to a new position.